LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Emission Systems & Sub-Systems >> Hydrocarbon ADSORBER Catalyst Vacuum Switching Valve >> Removal & Installation (Prius)

Removal & Installation (Prius)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS .

Hydrocarbon Adsorber Catalyst (HCAC) Vacuum Switching Valve (VSV) servicing procedure is just primarily an unbolt and bolt-on procedure. HCAC VSV is located on bracket bolted to timing chain end of engine. See Fig 1.

Fig 1: Locating Hydrocarbon Adsorber Catalyst Vacuum Switching Valve (Prius)
G00020827Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002