LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Emission Systems & Sub-Systems >> EGR Valve >> Removal & Installation (Tacoma 2.7L)

Removal & Installation (Tacoma 2.7L)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.

EGR valve servicing procedure is just primarily an unbolt and bolt-on procedure using a NEW gasket. Tighten EGR valve retaining nuts and EGR pipe bolts/nuts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals