LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Engine Controls - Removal & Installation 4-Cylinder) >> Emission Systems & Sub-Systems >> Canister Closed Valve Vacuum Switching Valve >> Removal & Installation (ECHO)

Removal & Installation (ECHO)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Canister Closed Valve Vacuum Switching Valve (CCV VSV) is located on charcoal canister. See Fig 1. Charcoal canister is located near fuel tank.
  2. Remove charcoal canister.
  3. Remove bracket for access to CCV VSV if necessary. See Fig 1.
  4. Remove screw and CCV VSV with "O" ring from charcoal canister.
  5. To install, reverse removal procedure using NEW "O" ring.
Fig 1: Locating Canister Closed Valve Vacuum Switching Valve (ECHO)
G99G54722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002