Camry, Camry Solara With Manual A/C, Celica, Highlander, MR2 & RAV4
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2003 Toyota Tacoma, 2003 Toyota RAV4, 2003 Toyota Prius, 2003 Toyota Matrix, and 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect electrical connector for A/C compressor lock sensor and magnetic clutch on front of A/C compressor. This is the electrical located near front of A/C compressor.
- Using ohmmeter, check resistance between terminals No. 1 and 2 on electrical connector for A/C compressor lock sensor and magnetic clutch. See Fig 1-Fig 5
. Ensure resistance is within specification. See A/C COMPRESSOR LOCK SENSOR RESISTANCE table. Replace A/C compressor lock sensor if resistance is not within specification. It may be necessary to replace A/C compressor along with A/C compressor lock sensor as an assembly. Consult parts department for parts availability.A/C COMPRESSOR LOCK SENSOR RESISTANCE
Application Ohms @ 68°F (20°C) Camry 165-205 Camry Solara 65-125 Celica, Highlander, MR2 & RAV4 165-205 Fig 1: Identifying Terminals On A/C Compressor Lock Sensor & Magnetic Clutch Electrical Connector (Camry & Highlander)Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002