LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Engine Control System Self Diagnostics) >> Diagnostic Tests >> DTC P0128: Coolant Thermostat Malfunction >> Diagnosis & Repair

Diagnosis & Repair

WARNING: This page is about a different car, the 2003 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Using Toyota hand-held tester or scan tool, read FREEZE FRAME data. Freeze frame data records engine conditions when malfunction is detected.
  1. Remove and inspect cooling system thermostat for damage and proper operation.
  2. If thermostat is okay, ensure proper cooling system bleeding procedure is performed when filling cooling system. See COOLING SYSTEM BLEEDING under COOLING SYSTEM in REMOVAL & INSTALLATION - 4-CYLINDER article. Go to next step. If thermostat is defective, replace thermostat as necessary and retest system. Ensure proper cooling system bleeding procedure is performed when filling cooling system. See COOLING SYSTEM BLEEDING under COOLING SYSTEM in REMOVAL & INSTALLATION - 4-CYLINDER article.
  3. Using Toyota hand-held tester or scan tool, check for any other DTCs. If other DTCs exist, diagnose and repair those DTCs first and retest. If only DTC P0128 exists, replace ECM. For ECM location, see Figure.
scientia non olet · About LEMON Manuals