Circuit Description
WARNING: This page is about a different car, the 2003 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
In this system, the signal of the stop light switch is used to judge whether the acceleration system is abnormal or not. The stop light switch has a duplex system (signals STP and ST1-) to memorize the abnormality when the signals of depressing and releasing the brake pedal are detected simultaneously. See IDENTIFYING NORMAL CONDITIONS table. Detecting condition of DTC is when the following conditions continue for 0.5 second or more:
- Ignition switch ON.
- Brake pedal released.
- STP signal is OFF when the ST1- signal is OFF.
IDENTIFYING NORMAL CONDITIONS
| Signal | Brake Pedal Released | In Transition | Brake Pedal Depressed |
|---|---|---|---|
| STP | OFF | ON | ON |
| ST1- | ON | ON | OFF |