LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Engine Control System Self Diagnostics - 4-Cylinder) >> Diagnostic Tests >> DTC P0016: Crankshaft Position - Camshaft Position Correlation (Bank No. 1 Sensor "A") >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2003 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

For circuit description, see DTC P0335: CRANKSHAFT POSITION SENSOR "A" CIRCUIT . Detecting condition of DTC is when there is a deviation in the crankshaft position sensor signal and VVT sensor (bank No. 1) signal (2 trip detection signal).