LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Control System Self-Diagnostics - 4-CYL (Except PZEV)) >> Diagnostic Tests >> DTC P0335: Crankshaft Position Sensor "A" Circuit & DTC P0339: Crankshaft Position Sensor "A" Circuit Intermittent >> Diagnosis & Repair

Diagnosis & Repair

WARNING: This page is about a different car, the 2003 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

For diagnosis and repair, see Fig 1-Fig 3 . To identify circuits referenced in testing, see appropriate WIRING DIAGRAM under ENGINE PERFORMANCE in SYSTEM WIRING DIAGRAMS. To check ECM inputs and outputs, see PIN VOLTAGE CHARTS article. For removal and installation of components, see REMOVAL, OVERHAUL & INSTALLATION - 4-CYLINDER article.

Fig 1: DTCs P0335 & P0339 Wiring Diagram
G00233336Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: DTCs P0335 & P0339 Diagnostic Procedure (Step 1)
G00233337Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: DTCs P0335 & P0339 Diagnostic Procedure (Steps 2-4)
G00233338Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002