LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Control System Self-Diagnostics - 4-CYL (Except PZEV)) >> Diagnostic Tests >> DTC P0101: Mass Or Volume Air Flow Circuit Range/Performance Problem >> Diagnosis & Repair

Diagnosis & Repair

WARNING: This page is about a different car, the 2003 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

For wiring diagram, see DTC P0100, DTC P0102 & DTC P0103 .

NOTE: Read freeze frame data using the hand-held tester or the OBD II scan tool, as freeze frame data records the engine conditions when a malfunction is detected. When trouble shooting, it is useful for determining whether the vehicle was running or stopped, the engine was warmed up or not, the air-fuel ratio was lean or rich, etc. at the time of the malfunction.

Read the DTC using the hand-held tester or the OBD II scan tool. If DTC P0101 and other codes are output, go to the DTC chart. See DIAGNOSTIC TROUBLE CODE DEFINITIONS . If DTC P0101 is output, replace the mass air flow meter sub-assembly. See REMOVAL, OVERHAUL & INSTALLATION - 4-CYLINDER article.

scientia non olet · About LEMON Manuals