LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Controls - Theory & Operation) >> Computerized Engine Controls >> Input Devices >> Knock Sensor (Avalon, Camry 3.0L V6, Camry Solara 3.0L V6, Highlander 3.0L V6 & Sienna)

Knock Sensor (Avalon, Camry 3.0L V6, Camry Solara 3.0L V6, Highlander 3.0L V6 & Sienna)

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2003 Toyota Tundra, 2003 Toyota Tacoma, 2003 Toyota Sienna, 2003 Toyota Sequoia, and 2003 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

Knock sensors No. 1 and 2 monitor ignition knock conditions and deliver input signals to KNKR and KNKL terminals of Engine Control Module (ECM). ECM may use input signals for determining ignition timing (spark advance) and for controlling fuel injection system. For knock sensor location, see KNOCK SENSOR under ENGINE SENSORS & SWITCHES in REMOVAL & INSTALLATION - V6 & V8 article.