Removal & Installation (ES300 & RX300)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Lexus SC 430, 2003 Lexus RX 300, 2003 Lexus LX 470, 2003 Lexus LS 430, and 2003 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
Crankshaft Position (CKP) sensor is located at front of crankshaft, near crankshaft pulley. Remove passenger's side inner fender apron for access to crankshaft pulley. Remove bolt and CKP sensor. Disconnect electrical connector at CKP sensor. To install, reverse removal procedure. Tighten bolt to specification. See TORQUE SPECIFICATIONS .