Removal & Installation (SC430)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Lexus SC 430, 2003 Lexus RX 300, 2003 Lexus LX 470, 2003 Lexus LS 430, and 2003 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Camshaft Position (CMP) sensor is mounted to front of left upper (No. 3) timing belt cover. Drain engine coolant. Remove engine cover. Separate radiator hose no. 1. Remove timing belt cover No. 3. Remove camshaft position sensor.
- To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Check for engine coolant leaks.