Removal & Installation (GS300 & GS430)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Lexus SC 430, 2003 Lexus RX 300, 2003 Lexus LX 470, 2003 Lexus LS 430, and 2003 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
Charcoal canister assembly is located next to fuel tank. Remove right rear axle shaft. See appropriate RWD AXLE SHAFTS article in DRIVE AXLES. Disconnect vapor pressure sensor connector. Disconnect vapor pressure sensor vacuum switching valve connector. Disconnect charcoal canister hoses. Remove nuts and charcoal canister assembly. To install, reverse removal procedure.