Crankshaft Position Sensor
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2003 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
The Crankshaft Position (CKP) sensor is a pick-up coil and is mounted next to crankshaft pulley. Turn ignition off. Disconnect CKP sensor connector. Measure resistance between CKP sensor terminals. Replace CKP sensor if resistance is not as specified. See CRANKSHAFT POSITION SENSOR RESISTANCE table.
CRANKSHAFT POSITION SENSOR RESISTANCE
| Temperature °F (°C) | Ohms |
|---|---|
| 14-122 (-10-50) | 1630-2740 |
| 123-212 (51-100) | 2065-3225 |