DTC P0300, DTC P0301, DTC P0302, DTC P0303, DTC P0304, DTC P0305, DTC P0306, DTC P0307 Or DTC P0308: Notes
WARNING: This page is about a different car, the 2003 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
Code Definitions
- DTC P0300: Random/Multiple Cylinder Misfire Detected
- DTC P0301: Cylinder 1 Misfire Detected
- DTC P0302: Cylinder 2 Misfire Detected
- DTC P0303: Cylinder 3 Misfire Detected
- DTC P0304: Cylinder 4 Misfire Detected
- DTC P0305: Cylinder 5 Misfire Detected
- DTC P0306: Cylinder 6 Misfire Detected
- DTC P0307: Cylinder 7 Misfire Detected
- DTC P0308: Cylinder 8 Misfire Detected
NOTE:
For information on engine immobilizer system, see COMPUTERIZED ENGINE CONTROLS
in THEORY & OPERATION article.
CAUTION:
If ECM replacement is instructed in following testing, always ensure ECM harness connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. If ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES - LEXUS
article.