Mode 3
WARNING: This page is about a different car, the 2001 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
In this mode, door lock release actuator operation check can be performed.
From mode 2, move shift selector lever to PARK and push right power sliding door control switch, located on inside "C" pillar next to power sliding door handle, for 4 seconds or more. PWR DOOR indicator light will flash 3 times for 3 seconds and mode 2 will be transferred to mode 3. When pushing power sliding door control switch to on position with right door closed, release actuator will close for 0.4 seconds and open for 1.2 seconds.