Power Sliding Door Fuel Filler Door Courtesy Switch
WARNING: This page is about a different car, the 2001 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- Connect an ohmmeter between terminals No. 1 and No. 2 and check for continuity when power door main switch is ON position. See Fig 1. If continuity is as specified, go to next step. If continuity is not as specified, replace switch.
- Connect an ohmmeter between terminals No. 1 and No. 2 and check for no continuity when power door main switch is OFF position. If continuity is not as specified, replace switch.