LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Prius >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Columns - Tilt Wheel - Cars >> Removal & Installation >> Steering Wheel & Air Bag >> Installation

Steering Wheel & Air Bag: Installation

  1. To install, reverse removal procedure. Before installing steering wheel, ensure spiral cable is properly aligned. See SPIRAL CABLE  under ADJUSTMENTS. Tighten steering wheel nut and Torx screws to specification. See TORQUE SPECIFICATIONS .
  2. After steering wheel and steering wheel pad are installed, ensure proper operation of air bag system by turning ignition switch to ACC or ON position. AIR BAG warning light should illuminate for about 6 seconds. If AIR BAG warning light remains illuminated for more than 6 seconds, air bag system is malfunctioning and needs repair.
  3. Turn ignition switch off. If AIR BAG warning light illuminates with ignition switch off, a short circuit may be present in AIR BAG warning light circuit.
scientia non olet · About LEMON Manuals