LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Corolla CE, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> System Tests >> Fuel Gauge >> Fuel Sending Unit Resistance (Except Prius)

Fuel Sending Unit Resistance (Except Prius)

NOTE: Fuel gauge sending unit resistance test procedure for MR2 is not available from manufacturer.
  1. Turn ignition off. Remove fuel sending unit from fuel tank. Connect ohmmeter between indicated fuel sending unit terminals. See Figure.
  2. Move fuel sender arm and ensure resistance is as specified. See FUEL SENDING UNIT RESISTANCE  table. If resistance is not as specified, replace fuel sending unit.
scientia non olet · About LEMON Manuals