Circuit Description
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Toyota RAV4, 2002 Toyota Highlander, 2002 Toyota Camry, 2002 Lexus RX 300, and 2001 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
Shifting from 1st to overdrive is performed in combination with on and off cycle of shift solenoids SL1 and SL2. Solenoids are controlled by ECM. If an open or short circuit occurs in either solenoid, ECM controls remaining shift solenoids to allow vehicle to operate and ensures smooth transaxle shifting. See Figure. ECM checks for an open or short circuit in shift solenoid S4. DTC will set when ECM detects solenoid is energized and resistance is 8 ohms or less, or when solenoid is not energized and solenoid resistance is 100 k/ohms or more. Possible causes are:
- Open or short in solenoid circuit.
- Shift solenoid malfunction.
- ECM malfunction.