LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> 4Runner Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Booster >> Removal & Installation >> Hydraulic Brake Booster Assembly >> Disposal Of Accumulator

Disposal Of Accumulator

CAUTION: Never cut at a stretch.

Place accumulator in a vise, cover it with a cloth over a saw, then cut the accumulator body slowly. See Fig 1. When the outer body of the accumulator is cut, gas will discharge.

Fig 1: Disposing Of Accumulator
G00217936Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002


For disposal procedures see DISPOSAL OF ACCUMULATOR .



For disposal procedures, see DISPOSAL OF ACCUMULATOR .