Removal (Celica)

On 1999 model, remove suspension upper brace and air cleaner assembly. On 2000 model, remove battery. On all models, disconnect level warning switch connector. Draw brake fluid from reservoir with a syringe. On models with M/T, disconnect reservoir hose. Disconnect and plug brake lines. On 1999 model, remove 2 mounting nuts, and pull out 2 or 3-way union, bracket, master cylinder and gasket. On 2000 model with ABS, remove 2 mounting nuts. Pull out check valve bracket and master cylinder. Remove gasket from cylinder. On 2000 model without ABS, remove 2 mounting nuts. Pull out check valve bracket, 3-way and master cylinder. Pull out reservoir stopper. Remove reservoir and 2 grommets. Remove cap and strainer from reservoir.