LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Transmission >> M/T Clutches Manual & Hydraulic >> Adjustments >> Clutch Pedal Height

Clutch Pedal Height

  1. Measure clutch pedal height from highest point of clutch pedal pad to floor panel. See Fig 1. Ensure clutch pedal height is within specification. See CLUTCH PEDAL HEIGHT SPECIFICATIONS  table.
  2. If clutch pedal height adjustment is required, loosen lock nut and rotate bolt at clutch pedal height adjustment point until correct clutch pedal height is obtained. See Fig 1. Check clutch pedal free play and push rod play. See CLUTCH PEDAL FREE PLAY & PUSH ROD PLAY .
CLUTCH PEDAL HEIGHT SPECIFICATIONS

Application In. (mm)
Camry & Solara
2.2L 6.17-6.57 (156.8-166.8)
3.0L 6.37-6.76 (161.8-171.8)
Celica
1999 (S54) 5.71-6.10 (144.9-154.9)
2000 (C56) 5.34-5.73 (135.6-145.6)
2000 (C60) 5.39-5.78 (136.9-146.9)
Corolla (C59) 5.45-5.85 (138.4-148.4)
ECHO 5.29-5.68 (134.3-144.3)
MR2 5.05-5.44 (128.0-138.2)
RAV4 6.38-6.78 (162.1-172.1)
Tacoma
From Floor Panel 6.69-7.09 (170.0-180.0)
From Asphalt Sheet 6.57-6.97 (167.0-177.0)
Tundra
From Dash Panel 6.30-6.70 (160.1-170.1)
From Dash Insulator 6.11-6.50 (155.1-165.1)
4Runner
From Floor Panel 6.89-7.28 (175.0-185.0)
From Asphalt Sheet 6.77-7.17 (172.0-182.0)
Fig 1: Checking Clutch Pedal Height, Push Rod Play & Identifying Adjustment Points (Typical)
G94C47557Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002