LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Gear >> Power Steering Rack & Pinion >> Removal & Installation >> Power Steering Pump >> Removal (Land Cruiser)

Removal (Land Cruiser)

  1. Raise and support front of vehicle. Remove right and left engine under covers. Disconnect MAF connector. Remove hose from air cleaner. Remove clamp, bolts and remove air cleaner assembly. Loosen drive belt tensioner and remove drive belt.
  2. Disconnect and plug return hose. Use drain pan to catch power steering fluid when connections are released. Remove 3 bolts, and remove power steering pump.
scientia non olet · About LEMON Manuals