LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Gear >> Power Steering Rack & Pinion >> Removal & Installation >> Power Rack & Pinion >> Removal (Sienna)

Removal (Sienna)

  1. Place front wheels in straight-ahead position. Remove steering wheel and pad. Disconnect both tie rod ends. See FRONT - AVALON, CAMRY, CAMRY SOLARA, CELICA, COROLLA, ECHO, RAV4 & SIENNA article in SUSPENSION.
  2. Disconnect lower steering column shaft from steering gear. Remove nut holding tube clamp on rack housing. Disconnect pressure and return lines from steering gear.
  3. Disconnect, but DO NOT remove, stabilizer bar. See FRONT - AVALON, CAMRY, CAMRY SOLARA, CELICA, COROLLA, ECHO, RAV4 & SIENNA article in SUSPENSION.
  4. Remove power rack and pinion assembly mounting bolts and nuts. Lift stabilizer bar to remove bolts. Remove power rack and pinion assembly.
scientia non olet · About LEMON Manuals