LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Gear >> Power Steering Rack & Pinion >> Removal & Installation >> Power Rack & Pinion >> Removal (4Runner)

Removal (4Runner)

  1. Place front wheels in straight-ahead position. Remove steering wheel and pad. Remove engine under cover.
  2. Remove stabilizer bar. Disconnect both tie rod ends. Disconnect lower steering column shaft from steering gear. Disconnect pressure and return lines from steering gear.
  3. Remove power rack and pinion assembly mounting bolts and nuts. Remove power rack and pinion assembly.
scientia non olet · About LEMON Manuals