LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Gear >> Power Steering Rack & Pinion >> Removal & Installation >> Power Rack & Pinion >> Installation (RAV4)

Installation (RAV4)

  1. To install, reverse removal procedure, except install power feed and return line clamps to rack and pinion assembly first.
  2. After installation, place front wheels in straight-ahead position. Center steering wheel spiral cable, then install steering wheel and pad. Check front wheel alignment.
scientia non olet · About LEMON Manuals