LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Columns - Tilt Wheel >> Removal & Installation >> Steering Wheel & Horn Pad >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Ensure wheels are in straight-ahead position. Remove screw securing horn pad, and remove horn pad. Disconnect electrical connector(s). Remove lock nut and washer.
  2. Mark steering shaft and steering wheel for installation reference. Install steering wheel puller and remove steering wheel from shaft. To install, reverse removal procedure. Tighten steering wheel nut to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals