LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Disposal Procedures >> Off-Vehicle Deployment >> Seat Belt Pretensioner

Seat Belt Pretensioner

  1. Before proceeding, See AIR BAG SAFETY PRECAUTIONS . Remove appropriate seat belt pretensioner. See SEAT BELT PRETENSIONERS  under REMOVAL & INSTALLATION.
  2. Connect Deployment Tools (09082-00700 and 09082-00740) to seat belt pretensioner connector. Position seat belt pretensioner on ground an cover with wheel and tire assembly. See Fig 1. Position deployment tool at least 33 feet away from seat belt pretensioner. Press activation switch to deploy seat belt pretensioner. Because of heat, wait 30 minutes before handling. Seal deployed pretensioner in vinyl bag and dispose of in usual manner.
Fig 1: Deploying Seat Belt Pretensioner
G98C08196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals