LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Theory and Operation >> Engine Controls - Theory & Operation >> Computerized Engine Controls >> Input Devices >> Camshaft & Crankshaft Position Sensors (Camry 3.0L V6 & Camry Solara 3.0L V6)

Camshaft & Crankshaft Position Sensors (Camry 3.0L V6 & Camry Solara 3.0L V6)

Camshaft position sensor and crankshaft position sensor deliver input signals to Engine Control Module (ECM). Camshaft position sensor is located at flywheel end of front cylinder head, just below valve cover. Crankshaft position sensor is located at front of crankshaft, near crankshaft pulley. ECM may use input signals for determining ignition timing (spark advance), and for controlling fuel injection system, engine idle speed control system, EGR system, heated oxygen sensor system and Acoustic Control Induction System (ACIS).