LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation - 4-Cylinder >> Fuel Systems >> Throttle Body >> Removal (Camry CNG & Gasoline Models, & Camry Solara)

Removal (Camry CNG & Gasoline Models, & Camry Solara)

  1. Drain cooling system. Disconnect necessary electrical connectors, wires and hoses for removal of upper cap on air cleaner assembly. Disconnect air cleaner hose at throttle body. Remove upper cap on air cleaner assembly and air cleaner hose.
  2. Disconnect control cables, vacuum hoses and electrical connectors at throttle body. Remove bolts, throttle body and gasket from intake manifold.
  3. Disconnect remaining coolant hoses and air assist hose from bottom of throttle body. Remove throttle body. Remove screws, Idle Air Control (IAC) valve and gasket from throttle body (if necessary).
scientia non olet · About LEMON Manuals