LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panels >> Removal & Installation >> Instrument Cluster >> Removal & Installation (4Runner)

Removal & Installation (4Runner)

  1. Disable air bag system, remove driver's air bag and steering wheel. See AIR BAG RESTRAINT SYSTEMS article. Remove steering column covers. Remove 4 lower finish panel retaining bolts. Remove hood release and fuel tank lid release lever.
  2. Using a screwdriver, carefully remove instrument panel lower finish panel. Remove ignition switch bezel. Disconnect air registers. Remove 4 retaining screws from instrument cluster finish panel. Carefully remove cluster finish panel. Disconnect wiring harness connectors.
  3. Remove instrument cluster retaining screws. Pull cluster outward enough to disconnect wiring harness connectors. Remove instrument cluster. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals