LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shafts & Universal Joints - 4WD >> Overhaul >> Drive Shaft >> Disassembly

Drive Shaft: Disassembly

  1. Place matchmarks on the sleeve yoke and shaft. See Fig 1.
  2. Pull out the sleeve yoke from the shaft.
  3. Remove the dust cover from the shaft.
Fig 1: Placing Matchmarks On Sleeve Yoke & Drive Shaft
G00140259Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals