LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Power Sun Roof >> Removal & Installation >> Sun Roof Assembly >> Disassembly & Reassembly (4Runner)

Disassembly & Reassembly (4Runner)

  1. Remove sun shade trim. Remove side trim panel. Remove sun roof mounting nuts and glass. Remove drip channel. Remove control relay, and sun roof motor assembly. Remove wind deflector. Remove sun roof housing. Remove drive rail.
  2. Remove screws and sun roof panel stoppers. Remove sunshade trim. Remove side trim. Remove 4 nuts and sun roof glass. Remove rear sun roof drip channel. Remove control relay.
  3. Remove 3 bolts and sun roof motor. Remove sun roof wind deflector panel. Remove screws and guide rail stoppers. Remove 6 screws and sun roof housing. Slide drive cable forward and remove it. To reassemble, adjust drive cables to a completely closed and tilted down position. Slide both cables forward or backwards to align marks. See Figure. To complete reassembly, reverse disassembly procedure.
scientia non olet · About LEMON Manuals