LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Power Sun Roof >> Component Tests >> Limit Switches >> Camry (Japan Built)

Camry (Japan Built)

  1. Unplug sun roof motor and limit switch connector. See Fig 1. For limit switch No. 1, continuity should not exist between terminals No. 4 and 5 with switch pin released. With pin pressed in, continuity should exist between terminals No. 4 and 5.
  2. For limit switch No. 2, continuity should not exist between terminals No. 4 and 6 with switch pin released. With pin pressed in, continuity should exist between terminals No. 4 and 6. Replace switch if continuity is not as specified.
Fig 1: Identifying Sun Roof Motor & Limit Switch Terminals (Camry - Japan Built, Corolla, RAV4 2-Door & Sienna)
G98H10980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002