Avalon & Celica (1999)
- Limit switches are located next to sun roof motor. Disconnect limit switch connector. See Fig 1 or Fig 2
. If testing limit switch No. 1, continuity should not exist between terminals No. 1 and 3 with switch pin released. Continuity should exist between terminals No. 1 and 3 with switch pin pushed in. If continuity is not as specified, replace switch.
- If testing limit switch No. 2, continuity should not exist between terminals No. 2 and 3 with switch pin released. Continuity should exist between terminals No. 2 and 3 with switch pin pushed in. If continuity is not as specified, replace switch.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002