Antenna Systems (Inspection): Antenna: Removal
- Disconnect antenna cable
:
- Remove the radio and disconnect the antenna cable.
- Disconnect the antenna cable from the 4 clamps.
- Remove antenna nut and ornament .
- W/O wheel opening extension, remove the clips and fender liner :
- W/ Wheel Opening Extension, remove fender liner
:
- Remove the 3 clips.
- Pull the fender liner.
- Remove Antenna Assembly
:
- Auto Antenna models, Disconnect the connector.
- Remove the bolt and antenna assembly.
NOTE:
The following operations should be done by 2 persons.