Fuel Gauge Resistance
Remove instrument cluster. Disconnect cluster connector(s). Using an ohmmeter, measure resistance between appropriate fuel gauge terminals at instrument cluster. See Figure, Figure, Figure or Fig 1 . See FUEL GAUGE RESISTANCE table. Replace fuel gauge if resistance is not as specified.
FUEL GAUGE RESISTANCE
| Application & Terminals | (1) Ohms | ||||
|---|---|---|---|---|---|
| Avalon | |||||
| "A" & "B" | 151 | ||||
| "A" & "C" | 306 | ||||
| "B" & "C" | 154 | ||||
| Camry & Camry Solara | |||||
| "A" & "B" | 126 | ||||
| "A" & "C" | 281 | ||||
| "B" & "C" | 154 | ||||
| Celica | |||||
| "A" & "B" | 154 | ||||
| "A" & "C" | 126 | ||||
| "B" & "C" | 281 | ||||
| Corolla | |||||
| With Tachometer | |||||
| "A" & "B" | 108 | ||||
| "A" & "C" | 233 | ||||
| "B" & "C" | 125 | ||||
| Without Tachometer | |||||
| "A" & "B" | 106 | ||||
| "A" & "C" | 256 | ||||
| "B" & "C" | 1150 | ||||
|
|||||