Fuel Gauge Resistance Test
Remove instrument cluster. Disconnect cluster connectors. Using an ohmmeter, measure resistance between appropriate fuel gauge terminals on back of instrument cluster. See Figure-Figure . See FUEL GAUGE RESISTANCE SPECIFICATIONS table. If resistance is not as specified, replace fuel gauge.
FUEL GAUGE RESISTANCE SPECIFICATIONS
| Application & Terminals | (1) Ohms | ||||
|---|---|---|---|---|---|
| Land Cruiser | |||||
| "A" & "B" | 160 | ||||
| "C" & "D" | 160 | ||||
| RAV4 | |||||
| "A" & "B" | 106 | ||||
| "A" & "C" | 256 | ||||
| "B" & "C" | 150 | ||||
| Sienna | |||||
| "A" & "B" | 262 | ||||
| "A" & "C" | 107 | ||||
| "B" & "C" | 154 | ||||
| Tacoma | |||||
| With Tachometer | |||||
| "A" & "B" | 137 | ||||
| "A" & "C" | 260 | ||||
| "B" & "C" | 123 | ||||
| Without Tachometer | |||||
| "A" & "B" | 160 | ||||
| "A" & "C" | 84 | ||||
| "B" & "C" | 244 | ||||
| Tundra | |||||
| With Or Without Tachometer | |||||
| "A" & "B" | 83 | ||||
| "A" & "C" | 268 | ||||
| "B" & "C" | 160 | ||||
| 4Runner | |||||
| "A" & "B" | 151 | ||||
| "A" & "C" | 254 | ||||
| "B" & "C" | 103 | ||||
|
|||||