Removal (Land Cruiser/LX470 & Previa With Rear Disc Brakes)

1. Remove rotor. See REAR BRAKE ROTOR . Remove tension spring, shoe return springs and shoe strut with spring.
2. Pull out on front shoe and remove adjusting screw set. Remove hold-down spring, front shoe and tension spring. Remove rear shoe, and disconnect parking brake cable from lever. See Fig 1.

Fig 1: Exploded View Of Internal Parking Brake Assembly (Previa Shown; Land Cruiser/LX470 Similar)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002