Removal & Installation (4Runner)
- Disable air bag system, remove driver's air bag and steering wheel. See AIR BAG RESTRAINT SYSTEMS article. Remove steering column covers. Remove 4 lower finish panel retaining bolts. Remove hood release and fuel tank lid release lever.
- Using a screwdriver, carefully remove instrument panel lower finish panel. Remove ignition switch bezel. Disconnect air registers. Remove 4 retaining screws from instrument cluster finish panel. Carefully remove cluster finish panel. Disconnect wiring harness connectors.
- Remove instrument cluster retaining screws. Pull cluster outward enough to disconnect wiring harness connectors. Remove instrument cluster. To install, reverse removal procedure.