Disabling System
- Turn ignition switch to LOCK position. Disconnect and shield negative battery cable. Wait at least 90 seconds. Remove driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE under REMOVAL & INSTALLATION . Disconnect passenger-side air bag module connector, accessible through finish plate in glove box.
- Disconnect air bag sensor assembly connector. See AIR BAG SENSOR ASSEMBLY under REMOVAL & INSTALLATION . Disconnect right and left seat belt pretensioner connectors. See SEAT BELT PRETENSIONER under REMOVAL & INSTALLATION . Disconnect right and left-side air bag module connectors. See SIDE AIR BAG MODULE under REMOVAL & INSTALLATION . Disconnect right and left-side air bag sensor connectors. See SIDE AIR BAG SENSOR under REMOVAL & INSTALLATION .