Land Cruiser & LX470

Ignition coil resistance is not available at time of publication.

Fig 1: Releasing Typical Lock Claw On Spark Plug Wire (Avalon, Camry, Sienna, Tacoma, T100 & 4Runner)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Identifying Typical Holder & Grommet, & Checking Holder & Grommet Installation (Avalon, Camry, Sienna, Tacoma, T100 & 4Runner)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Checking Typical Ignition Coil Primary Resistance (Avalon, Camry, Sienna, Tacoma, T100 & 4Runner)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Checking Typical Ignition Coil Secondary Resistance (Avalon, Camry, Sienna, Tacoma, T100 & 4Runner)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

IGNITION COIL RESISTANCE - Ohms

Application

Primary

Secondary

Avalon, Camry & Sienna

Asian Ign. Coil ⁽¹⁾

Cold ⁽²⁾

.70-.94

10,800-14,900

Hot ⁽³⁾

.85-1.10

13,100-17,500

Diamond Ign. Coil ⁽¹⁾

Cold ⁽²⁾

.70-.94

6800-11,700

Hot ⁽³⁾

.85-1.10

8600-13,700

Tacoma, T100 & 4Runner

Cold ⁽²⁾

.67-1.05

9300-16,000

Hot ⁽³⁾

.85-1.23

11,700-18,800

⁽¹⁾	This is the manufacturer of the ignition coil.

⁽²⁾	Cold is with temperature of 14-122°F (-10-50°C).

⁽³⁾	Hot is with temperature of 122-212°F (50-100°C).