Fuel Gauge Resistance
Remove instrument cluster. Disconnect cluster connector(s). Using an ohmmeter, measure resistance between appropriate fuel gauge terminals at instrument cluster. See Figure, Figure, Figure, Figure, Figure, Figure or Fig 1 . See FUEL GAUGE RESISTANCE table. Replace fuel gauge if resistance is not as specified.
FUEL GAUGE RESISTANCE
| Application & Terminals | (1) Ohms | ||||
|---|---|---|---|---|---|
| Avalon | |||||
| Terminals A & B | 151 | ||||
| Terminals A & C | 306 | ||||
| Terminals B & C | 154 | ||||
| Camry | |||||
| Terminals A & B | 126 | ||||
| Terminals A & C | 281 | ||||
| Terminals B & C | 154 | ||||
| Celica | |||||
| Terminals A & B | 154 | ||||
| Terminals A & C | 126 | ||||
| Terminals B & C | 281 | ||||
| Corolla | |||||
| With Tachometer | |||||
| Terminals A & B | 108 | ||||
| Terminals A & C | 233 | ||||
| Terminals B & C | 125 | ||||
| Without Tachometer | |||||
| Terminals A & B | 106 | ||||
| Terminals A & C | 256 | ||||
| Terminals B & C | 1150 | ||||
| Supra | |||||
| Terminals A & B | 270 | ||||
| Terminals A & C | 124 | ||||
| Terminals B & C | 146 | ||||
| Tercel | |||||
| With Tachometer | |||||
| Terminals A & B | 116 | ||||
| Terminals A & C | 177 | ||||
| Terminals B & C | 61 | ||||
| Without Tachometer | |||||
| Terminals A & B | 171 | ||||
| Terminals A & C | 273 | ||||
| Terminals B & C | 102 | ||||
|
|||||