LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission Removal & Installation - A/T >> Removal & Installation >> Automatic Transmission TACOMA >> Removal (Tacoma 2WD 2.4L 4-Cyl.)

Removal (Tacoma 2WD 2.4L 4-Cyl.)

  1. Manufacturer recommends removing engine and transmission as an assembly and then remove transmission from engine. See 2.4L & 2.7L 4-CYLINDER article in ENGINES for engine removal.
  2. With engine and transmission removed, remove starter. Remove bolts and stiffener plates. Stiffener plate fits between each side of cylinder block and front of transmission.
  3. Remove torque converter cover from front of transmission. Remove torque converter bolts. Remove transmission-to-cylinder block bolts. Separate transmission from engine.
scientia non olet · About LEMON Manuals