Rear Planetary Gear Disassembly & Reassembly: Reassembly

Install No. 2 one-way clutch into outer race. Face No. 2 one-way clutch flanged side toward outer race shiny side. Install retainers and snap rings to both sides of No. 2 one-way clutch.
Install planetary gear into No. 2 one-way clutch facing inner race of planetary gear inward toward Black side of outer race. Check operation of No. 2 one-way clutch. Coat thrust washers with petroleum jelly. Install thrust washer on both sides of carrier. Align tab of washers with hollow of carrier.

Fig 1: Checking No. 2 One-Way Clutch Operation

Fig 2: Exploded View Of Rear Planetary Gear