LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1998 >> Avalon XLS >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul - A-540E, A-540H & A-541E >> Overhaul >> Manual Shift Linkage Disassembly & Reassembly >> Disassembly & Reassembly

Disassembly & Reassembly

  1. Remove parking lock pawl bracket. Using hammer and chisel, cut collar on manual valve shaft. Remove retaining spring. Drive out roll pin on shaft.
  2. Slide out shaft from case and remove manual valve lever and parking lock rod. Remove shaft oil seal. Remove pin, spring and parking lock pawl.
  3. To assemble, reverse disassembly procedure. Use NEW collar. Lubricate seal before installing manual valve lever shaft. Check operation of parking lock pawl.
scientia non olet · About LEMON Manuals