Front Suspension (Avalon, Camry, Celica, Corolla, Land Cruiser

Cruiser, Paseo, Previa, RAV4, Sienna & Tercel)

1) Check tires for wear and improper inflation. Inspect front wheel bearings for looseness. Check wheel runout. Wheel runout should not exceed .039" (1.0 mm) on Avalon, Camry, Celica, Corolla and RAV4, .055" (1.4 mm) on Paseo, Previa and Tercel, or .118" (3.0 mm) on Land Cruiser/LX470.

2) Inspect front suspension components for looseness. Ensure front shock absorbers work properly. Measure vehicle riding height. See RIDING HEIGHT ADJUSTMENT .

3) Measure camber of both front wheels. See ALIGNMENT SPECIFICATIONS . If camber is not within specification, inspect and replace any damaged or worn front suspension components. Camber is not adjustable on all models listed except Sienna. On Sienna, loosen lower strut mounting bolts and move steering knuckle until camber is within specification. Tighten bolts to specification. See TORQUE SPECIFICATIONS .