Steering Wheel & Air Bag: Installation
- To install, reverse removal procedure. Before installing steering wheel, ensure spiral cable is properly aligned. See SPIRAL CABLE under ADJUSTMENTS . Tighten steering wheel nut and Torx screws to specification. See TORQUE SPECIFICATIONS .
- After steering wheel and steering wheel pad are installed, ensure proper operation of air bag system by turning ignition switch to ACC or ON position. AIR BAG warning light should illuminate, then turn off after about 6 seconds.
- If AIR BAG warning light remains illuminated for more than 6 seconds, air bag system is malfunctioning and needs repair. If AIR BAG warning light illuminates with ignition off, a short circuit may be present in AIR BAG warning light circuit.