Activating System (1998 Rodeo & Trooper)
- Ensure ignition switch is in LOCK position, and ignition key is removed. Connect passenger-side Yellow 2-pin connector. Install glove box assembly. Connect driver-side Yellow 2-pin connector.
- Install SRS C-21 or SRS-1 fuse, or connect negative battery cable. Staying well away from air bag modules, turn ignition switch to ON position. Ensure AIR BAG indicator light operates properly, see SYSTEM OPERATION CHECK .
NOTE:
When SRS C-21 or SRS-1 fuse is removed and ignition switch is in ON position, AIR BAG indicator light will be on. This is a normal operation and does not indicate an SRS malfunction.